Liqui Moly Motorbike Engine Flush 250ml 1657
(Prior to Dispatch)
| Brand |
 |
|---|---|
| GTIN | 4100420016578 |
| MPN | 1657 |
| Handling Time | Same Business Day |
| Return Policy | 30 Days Return |
| Warranty | Manufacturer Warranty |
| Container type | Can sheet metal |
| Container contents | 250 ml |
| Color / appearance | yellow, cloudy |
| Form | liquid |
| Base | additive, carrier liquid |
| Viscosity at 40 C | 22,58 mm2/s |
| Flash point | 61 C |
| Pour point | -45 C |
| Odor | characteristic |
| Density at 20 C | 0,815 g/CM3 |
Liqui Moly Motorbike Engine Flush 250ml
Cleaning fluid for clearing the engine interior of troublesome deposits. Dissolves sludge and lacquer formers. All types of oil-soluble and oil-insoluble residues are brought into suspension and removed during the next oil change. This allows the clean engine and fresh oil to realize their full potential.
Flushes out and cleans the oil circuits of motorcycles with 4-stroke gasoline engines. The frequency of use is dependent on the degree of contamination of the oil circuit and on the quality of the oil used. 250 ml (1 can) is sufficient for up to 4.5 l of oil.
Benefits
- simple to use
- highly economical
- tested for the use with catalytic converters
- long engine service life
- does not attack common sealing materials
- restores the engine to its original performance
- cleaning and care
Application
250 ml (1 can) is sufficient for up to 4.5 l of oil. Add to warm motor oil before oil change. Then allow the engine to idle for approx. 10 minutes. With manual transmissions, press the clutch lever several times, holding it for a few seconds each time. Then change the oil and the filter.
Compatible with commercially available motor oils. Suitable for use on motorcycles with wet clutches.