AEM Cold Air Intake 21-5007C
MPN: 21-5007C
|
RPI: 110160
Trackable Shipping
Australia Wide
Handling Time
7-10 Business Days Handling Time
(Prior to Dispatch)
(Prior to Dispatch)
Return Policy
No Return (Unless Manufacturer Defect)
Type in your postcode or suburb to get an estimate on postage cost.
Click & Collect (no postage cost)
Unit 1/25 Bearing Road, Seven Hills, NSW, 2147
Ready-to-pickup: 7-10 Business Days*
*You'll receive a notification when your order is ready for pickup. For store details and opening hours, click here
| Brand | |
|---|---|
| GTIN | 840879011871 |
| MPN | 21-5007C |
| Handling Time | 7-10 Business Days |
| Return Policy | No Return (Unless Manufacturer Defect) |
| Warranty | Manufacturer Warranty |
| Air Box Included | No |
| Air Filter Color | Red |
| Air Filter Height | 5.125 in (130 mm) |
| Air Filter Large End Diameter | 6 in (152 mm) |
| Air Filter Material | Non-woven Synthetic |
| Air Filter Outlet Length | 3 in (76 mm) |
| Air Filter Outlet Shape | Round |
| Air Filter Outlet Width | 3 in (76 mm) |
| Air Filter Washable | Yes |
| California Restricted | Not legal for sale or use in California |
| Clamp Color/Finish | Natural |
| Clamp Material | Steel |
| Clamp Style | Regular |
| Clamps Included | 7 |
| Color | Gunmetal Gray |
| Coupler Color/Finish | Not Applicable |
| Couplers Included | None |
| Intake Pipe Color / Finish | Gunmetal Gray |
| Intake Pipe Material | Aluminum |
| Intake Pipe Outlet Shape | Round |
| Intake Pipe Outlet Width | 3 in (76 mm) |
| Mass Air Flow Sensor Adapter Included | Mass Air Flow Sensor Adapter Included When Required |
| Oil Included | No Filter Oil Required |
| Package Material | Paperboard |
| Package Type | Box |
| Product Box Height | 10.6 in (269 mm) |
| Product Box Length | 35.4 in (899 mm) |
| Product Box Width | 13.3 in (338 mm) |
| Product Style | AEM Hybrid Intake System |
| Product Weight | 10.44 lb (4.75 kg) |
| Replacement Filter | 21-203DK |
| Street Legal In All US States | No |
| TUV Approved (Europe) | No |
| Weight | 10.4 lb (4.7 kg) |
AEM Cold Air Intake Fits Honda Civic
The AEM 21-5007C Performance Hybrid Cold Air Intake System produces horsepower and torque gains by replacing your vehicles restrictive factory air filter and air intake housing. This air intake system was designed, tuned and dyno-tested to fit specific Honda Civic models with a B16A engine swap models with engine swaps. Air enters the system through an oversized AEM Dryflow synthetic washable air filter for outstanding air flow, filtration and performance. The air filter is relocated to the passenger-side wheel well which is designed to reduce intake air temperature and increase horsepower. The intake tubing is constructed from mandrel-bent aluminum featuring a durable gunmetal gray powder coated finish. This air intake system was developed to accommodate the engines factory emissions control devices including the engine breather hoses. The tapered cylinder shaped AEM Dryflow air filter is made from an oil-free, synthetic filter media that can be used for up to 100,000 miles beforecleaning is needed (depending on driving conditions). The air intake system is backed by AEM's Lifetime Limited Warranty. Since the hybrid air intake is for a vehicle with an engine swap, it is intended for off-road use only and is not 50-state legalThe AEM Hybrid air intake is a direct-fit for specific vehicles with engine swaps. This air intake is designed to give your engine more power and acceleration by replacing the restrictive factory air filter and intake assembly.
Suitable for the various Australian vehicle models listed below. This is a guide only.
Add your vehicle details to My Garage to ensure it fits your vehicle. This will activate our 100% Fitment Guaranteed.
- Honda Civic 1.6 EJ,EK (EK1) 1996-2000
- Honda Civic 1.6 EJ,EK (EK1, EJ6) 1996-2000
- Honda Civic 1.6 EJ,EK VTi (EK4) 1996-1998
- Honda Civic 1.6 EJ,EK i (EK1) 1996-2000
- Honda Civic 1.6 EJ,EK i Vtec (EK1) 1996-2000
- Honda Civic 1.6 EJ,EM1 i VTEC (EM1) 1996-2000
Write Your Own Review