Blueprint Engines 355Cid 375 Hp Sbc Crate Engine Tappet Hyd Cam A (EBP35512CT1) BP35512CT1

DESCRIPTION:

• DynoTested Warranty
• HP& Torque: 375 HP / 400 FTLBS
• Compression Ratio:10.0:1
• AluminumHeads
• Flat TappetCam
• Cast SteelCrank
• HypereutecticPistons

BLOCK:

• Hand picked seasonedblock
• Square andparallel decked
• Alignhoned main bearingbore
• Cylinders honedon computer controlled machineto within .0002 straightnessandroundness
• Cylindersare sonic tested forthickness
• 4-BoltMain
• 4.000" Bored.040" Over
• 1-PieceRear Main Seal
• Mechfuel pump provision:Yes
• Passenger SideDipstick Drilled and tappedfor clutchlinkage

ROTATINGASSEMBLY:

• Cast steelcrankshaft
• 3.480"Stroke
• OEM type 5.700"connecting rods w/ 150,000 psibolts
• Hypereutecticpistons
• InternalFront/ ExternalRear

CYLINDERHEADS:

• BluePrint Aluminum CylinderHeads - H8002K
• 64ccchamber
• 2.02"intake/1.60" exhaustvalves
• 195ccintake/75cc exhaustrunners

CAMSPECS:

• CamType: Flat Tappet
• .480Intake .486Exhaust
• 229 Intake /230 Exhaust duration @.050

IGNITIONTIMING:

• 34Degrees Total at 3500RPM

ALSOINCLUDES:

• New valve covers
• Oilpan
• Timingcover
• Brass freezeplugs
• Dyno testresults shipped withengine

NOTES:

• Picture shown with optionaltall, perimeter bolt valvecovers.
• This enginerequires a non weightedharmonic balancer, and a late350 (for 1 piece rear seal)weightedflexplate/flywheel.
• Ifyou are using an automatictransmission, BluePrintEngines recommends a 2000-2400rpm stallconverter.
• Recommendedspark plugs are Champion 792with .045" gap
• Not foruse in pollution controlledvehicles.
• This engineis not compatible with factoryfuel injection.
• ZincAdditive Required For FlatTappet Application Comp CamsEngine Break-In Oil Additive12oz. (354ml) Bottle, Part No.CO159
• Comp Cams Engine Break-In Oil15W-50, 1 Quart (946ml) PartNo. CO1591