Bordo Industrial Tools Chrome Tap MF Inter 10x1.25 4221-10.00I
(Prior to Dispatch)
Type in your postcode or suburb to get an estimate on postage cost.
Bordo Industrial Tools Chrome Tap MF Inter 10x1.25
Overview10 x 1.25mm MF Intermediate Chrome Tap
Chrome Alloy Metric Fine Intermediate Hand Tap.
Used as thread chasers to clean an existing thread.
They can also be used to create a new female thread in non-ferrous metals and plastics.
Chrome alloy taps are not suitable for creating precision, safety or critical threads.
Metric Fine angle of thread is 60 degrees.
The crest is flat and the thread has clearance at the root allowing external thread and internal thread to engage well.
Larger root radius and lower thread height enable easy screw thread processing and increase thread screw strength.
The major diameter of external thread and pitch are specified by a simple numerical value (most commonly measured in millimetres).
Intermediate Taps have a lead of four threads and are used in most general purpose applications to cut a thread true to a pre-drilled pilot hole.
| Part Number: | 4221-10.00I |
| Brand: | Bordo |
| Barcode: | 9326518041771 |
| Pack Qty: | 1 |
| Diameter (mm): | 10 |
| Drill Diameter (mm): | 8.9 |
| Lead: | Intermediate |
| Overall Length (mm): | 76 |
| Pitch (mm): | 1.25 |
| Thread Form: | Metric Fine |