Bostik Seal N Flex FC Sealant White 600ml 30803687

Bostik Seal N Flex FC Sealant White 600ml

Bostik Seal 'N' Flex FC is a high performance, fast cure one component polyurethane sealant that cures to form a tough, flexible seal and bond capable of cyclic expansion and compression movement up to 50% (+/-25%) of the original joint dimension.

• One component, no mixing required

• Fast tack free time and cure rate

• Internal and external bonding

• High bond strength

• Excellent adhesion to most materials

• Excellent acoustic properties

• Paintable* - +- 25% joint movement

• Non-slumping

• Resistant to fungal attack

• Water potable

• Excellent resistance against hydrolysis, aging and a wide range of chemicals

• Made in Australia

Bostik Seal 'N' Flex FC is a high performance, fast cure one component polyurethane sealant. When cured, it will form a tough and flexible seal and bond capable of cyclic, expansion and compression movement. It is virtually unaffected by normal weathering conditions such as rain, sunlight, snow, sleet, ultra-violet radiation, Ozone, atmospheric contamination and pollution. Its excellent weather ability enables it to retain its original properties after years of exposure. Bostik Seal 'N' Flex FC can be used for:

• Sealing gaps and adhering most facade and cladding panels to various building materials

• Sealing construction and expansion joints

• Sealing floor and concrete joints

• Trafficable areas including plats, stairs, roads, runways, aprons and pavements

• Granite, sandstone and marble pointing

• GRC, fibreglass and most specialty panel systems

• Vertical-Precast, block work, plasterboard and most common building substrates

• Pick resistant areas including prisons, cells, schools and public amenities

• Chemical resistant areas including service stations, hangers, aprons and bunded areas

• Potable water tanks

• Perimeter sealing of door and window framing

• For new construction and remedial applications

• Adhesive for wide range of building and construction applications

• Tack free time: 45 minutes

• Cure rate: 3.0 mm/24 hours

• Temperature resistance: -40 to +70C

• Full cure: 7 days

• Shore A hardness: 45

• Tensile strength: 2.5 to 3.0 N/mm

• Elongation at break: > 450%

• Total joint movement: +- 25%

• Maximum joint width: Up to 50mm on horizontal substrates Up to 20mm on vertical substrates