Chapman Starter Slotted Bit Set 9600
(Prior to Dispatch)
Type in your postcode or suburb to get an estimate on postage cost.
Chapman Starter Slotted Bit Set
Chapman Starter Slotted Bit Set
Overview
The Chapman Starter Slotted Bit Set includes 17 bits - 15 x slotted, 2 x Phillips and 1 x Hex.
Chapman Starter Slotted Bit Set
Features
Designed for precision gunsmithing, insert bits are milled from USA tool steel
Slotted bits have straight/parallel sides for excellent screw surface contact
Great for working on medical and dental equipment, sewing machines and weaponry
Chapman hand tools are used by all branches on the military including snipers
Chapman Starter Slotted Bit Set
Inclusions and Product Information
All the tools in this kit are interchangeable, offering 125+ tool combinations. Chapman tools are made in Durham, CT from American made materials.
MIDGET RATCHET, 3 5/8 in. EXTENSION, SCREWDRIVER HANDLE, SPINNER TOP
2 PHILLIPS #1,# 2
14 HOLLOW GROUND STRAIGHT SIDED SLOTTED
1. Each Chapman bit is designed for use within a specific torque range. Small bits are designed for less torque, large bits are designed for more torque. Chapman tools and bits are specifically engineered for hand use.
2. Chapman bits are tough and springy, not brittle. We use fine alloy steel heat treated with a black oxide finish. Each bit reaches its specified hardness that is not too hard to shatter or too soft to twist.
3. Our smaller bits, CMS-3,4 and CM-88, 89, 90, etc. are designed to prevent damage in applications where the screw is more valuable than the bit. When excess torque is applied, our bits are designed to break before marring an irreplaceable screw. If a screw is seated so tightly that the bit starts to bend, stop immediately, additional force will break the bit, mar the piece or rip off the screw head.
4. Our famous Chapman Midget Ratchet provides approximately 4 times the leverage of a large screw driver. The ratchet provides more torque than small screws are designed for, so use gentle but even pressure to loosen small screws. A small size bit can be twisted if sufficient force is applied. Use the knurled ends of our bits or the spinner top to apply finger pressure.
5. Some screws cannot be removed with a screwdriver. Cross-threaded, burred, chipped, varnished screws or screws treated with Loctite (especially on firearms) are near impossible to remove without tapping into the screw or heat.