Clear View Filtration 4" Hi-Flow Oil Filter -12 60 Micron Clear Anodiz (410-60) CV410-60
(Prior to Dispatch)
Type in your postcode or suburb to get an estimate on postage cost.
4" Hi-Flow See ThroughFilter Assembly with #12 Portsand 60 Micron Element, forrunning 50 weight or lighteroil. Recommended for Big andSmall Blocks where the userdoes not want to run adisposable filter. Filterworks where space is limitedand being light weight isideal.
Features:
- SmallestParticles Filtered: 60Microns
- Bypass ReliefValve: Yes
- Inlet &Outlet Fitting: #12 O-RingBoss - 1 1/16" - 12TPI
- Operating Temp:max 220 degreesFahrenheit
- OperatingPressure: max 150PSI
- Height: 3.00in.
- Width: 5.00in.
- Length: 6.00in.
- Filter Weight:3.50 pounds
SeeThrough Oil Filters can beused for many applicationsincluding Racing, Marine,Automotive, Farm, and forIndustrial Hydraulic Systems.These Patented Oil FilterAssemblies allow the user tovisually see oil pumpingthrough the filter, whichhelps to determine thecondition of the oil. When oilis not being pumped throughthe filter it can quicklydrained using an air chuck forfilling tires and compressedair. A hand bicycle pump willalso work. Apply a small shotof air to the air fitting onthe side of the inlet opening.Oil will empty out of theassembly in seconds exposingthe filter element andfiltered particles, even whenfiltering non transparentfluids like dirty oil. The SeeThrough top allows the user tovisually inspect particles andcontaminants that werefiltered out of the systemwithout draining or leakingany fluid, unbolting orloosening any fasteners orfittings and with out any lossof oil. Seeing these filteredparticles will help determineif they are from normal use orfrom bearings and othercomponents excessively wearingin the engine or machinerysupplying the FilterAssembly.
- Whenusing 50 weight or lighter oila 60 micron element isrecommended. When using 60weight or heavier oil A 115micron element isrecommended.
- Filtershave 2 Inlet and 1 OutletOpenings that are threaded for#12 O-Ring Boss - 1-1/16-12TPI fittings. The Inlet andOutlet Ports are machined to5/8" diameter and will notrestrict the flow when using a#12 line.
- Notrecommended for all AluminiumHemi combinations withexternal oil pumps