JBC 2 Tools DDU Desoldering Station with Electric Pump 230V DDSE-2QD

JBC 2 Tools DDU Desoldering Station with Electric Pump 230V

The complete solution to rework circuits with medium power requirement.

Equipped with T245 General Purpose Handle and DR560 Desoldering Iron.

Its DDE 2-Tool Control Unit is capable of manage up to 2 tools simultaneously and fully compatible with 10 different JBC tools.

It provides the best rework quality thanks to JBC Most Efficient Soldering System and, additionally, the intelligent Sleep & Hibernation Modes help to extend life of tips.

NOTE: CARTRIDGES NOT INCLUDED

• 1 x Instruction Manual

• 1 x DDE 2-Tool Control Unit

• 1 x MSE Electric Desoldering Module for DDE & DME

• 1 x T245 General Purpose Handle - (cartridge not included)

• 1 x DR560 Desoldering Iron - (C560003 already inserted)

• 1 x ADS Stand for T210 & T245

• 1 x DRS Stand for DR560

• 1 x SCH for Cartridge & Tips Holder

C245 Cartridge Series - available to purchase HERE

C560 Cartridge Series - available to purchase HERE

• Selectable Temperature: 90 to 450C / 190 to 840 F

• Idle temp. stability (still air): +-1.5C (+-3F), Meets and exceed IPC J-STD-001F

• Temp Accuracy: +-3% ( using reference cartridge)

• Temp Adjustment: +-50C (+-90F) Through station menu setting

• Vacuum: 75% / 570 mmHg / 22.4 inHg

• Flow Rate: 9 SLPM

• Connectivity: USB-B (Rear) - Software PC / Traceability, USB-A (Front) Firmware update Soldering Graphics management, RJ12 Connector

• ESD/EOS: Tip to ground vol./resist. Meets & exceed, ANSI/ESD S20.20-2014 IPC J-STD-001F

• Peak Power: 150W per tool - 23.5V

• Operating Temp Rate: 10 to 50 C / 50 to 122 F

• Dimensions: 232 x 148 x 120mm

• Weight: 9.25kg