Multicore 60/40 362 0.71mm 0.5kg 084
(Prior to Dispatch)
Type in your postcode or suburb to get an estimate on postage cost.
Multicore 60/40 362 0.71mm 0.5kg
ROSIN BASED CORED SOLDER WIRE FLUXES
Properties of Multicore 362 and 366 solid fluxes for cored solder wire:
- Good wetting on most common surfaces
- Two activity levels: Multicore 362 for general work and Multicore 366 for more difficult surfaces
- Non-corrosive
- Fast soldering
- Rosin based
- Halide activated
Product Range
Multicore 362 and 366 cored wires are manufactured with a range of flux contents. Although users will normally be using products with a nominal flux content of 3%. Multicore 362 and 366 cored wires are available in a variety of alloys conforming to J-STD-006 and EN 29453 or alloys conforming to similar national or international standards. For details refer to document Properties of Alloys used in Cored Solder Wires. A wide range of wire diameters is available. Alternative flux contents and alloys may be manufactured to special order.
Technical Specifications
Alloys: The alloys used for Multicore flux cored solder wires conform to the purity requirements of the common national and international standards. A wide range of wire diameters is available manufactured to close dimensional tolerances. For details refer to document Properties of Alloys used in Cored Solder Wires.
Flux: Multicore 362 and 366 solid flux leave dry and nonsticky residues. In use its odour is typically that of rosin fluxes.