Multitool Belt and Disc Grinding Attachment 915 x 50mm 178mm Disc PO362
(Prior to Dispatch)
Type in your postcode or suburb to get an estimate on postage cost.
Multitool Belt and Disc Grinding Attachment 915 x 50mm 178mm Disc
OverviewThe Multitool is a renowned, Australian designed belt grinding attachment which can be used on most bench grinders. The technology replaces the grinding wheel and converts a traditional grinder into a sophisticated work station ideal for sanding, grinding, sharpening, shaping, polishing and refinishing.
EFFICIENCY - Superior performance and a user friendly, toolless belt change in under 5 seconds.
VERSATILITY - Grinding, sanding or polishing in 4 positions on rubber contact wheel, platen, disc or free strapping. The unit can also be swivelled vertically or any position in between.
ACCURATE TRACKING - The running position of the belt is simple to adjust and it stays there, allowing for finishing into sharp corners.
QUALITY CONSTRUCTION - Robust, maintenance free with sealed ball bearings, hardened and ground essential components and zinc plating.
3 YEAR WARRANTY - Against faulty materials and workmanship, even when used commercially.
36" x 2" (915 x 50mm) belt - 100 Grit
7" (178mm) diameter disc - 120 Grit
3 1/2" (89mm) diameter rubber contact wheel
5 1/2" (140mm) diameter drive wheel
Suits most 150mm & 200mm bench grinders with a minimum of 1/3 HP motor and screw mounted guards