Nulon Apex+ 10W-40 Long Life Engine Oil 6L + Performance Engine Treatment 500ml RLK-NLN-212
Type in your postcode or suburb to get an estimate on postage cost.
(Prior to Dispatch)
Nulon Apex+ 10W-40 Long Life Engine Oil 6L + Performance Engine Treatment 500ml
Nulon APEX+, with Advanced Fluid Dynamics, dramatically improves engine oil flow efficiency to reduce power-robbing friction and maximise engine performance when you need it. Responding to driving inputs, Nulon APEX+ flows faster at low temperatures and resists extreme pressure, heat and wear of contacting metal surfaces to promote ultimate performance, fuel efficiency and protection in both everyday stop/start and the most demanding driving conditions.
Nulon APEX+ 10W-40 High Performance engine oil is formulated with premium additive technology to provide enhanced protection for non-turbo and turbocharged petrol and light-duty diesel engines in high-heat and high-load driving conditions.
Benefits
- Stay-in-grade technology ensures wear protection and fuel economy
- Suits non-turbo and turbocharged petrol and light-duty diesel engines
- Enhanced protection for vehicles using E10, E85 and LPG fuels
- Ultimate high-temperature stability
- Keeps your engine clean and prevents sludge formation
Nulon Pro-Strength Extreme Performance Engine Treatment is a performance engine oil treatment designed to maximise power in street and modified engines by reducing the friction of contacting metal surfaces. The high tech Moly DTc formula actively creates a low friction sacrificial barrier immediately when metal on metal contact occurs and Moly DTc molecules within the engine oil treatment continuously replenish this high strength barrier as it depletes. The reduction of internal engine friction reduces metal wear and heat, promoting efficiency and maximising engine power.
Benefits
- Dramatically reduces the friction properties of any engine oil
- Reduces internal metal on metal wear
- Slows down the depletion of other anti-wear additives such as zinc
- Provides superior cold start protection
- Suitable for both petrol and diesel engine oils
- Compatible with full synthetic, semi synthetic and mineral engine oils
DIRECTIONS FOR USE:
Warm engine to normal operating temperature and stop engine. Shake bottle and add contents to engine oil. For best results add when replacing with new engine oil. Restart engine to circulate formula, i.e idle for 15 minutes or go for a drive. If car is driven under sustained load or high stress then re-apply halfway between oil changes.
APPLICATION RATES:
Car Engines 1 Bottle
Trucks and 4WD 1 Bottle per 6 litres sump capacity
CAUTION:
Do not reuse container for any other purpose.
