Nulon Apex+ 5W-30 Long Life Engine Oil 10L + Performance Engine Treatment 500ml RLK-NLN-227
Type in your postcode or suburb to get an estimate on postage cost.
(Prior to Dispatch)
Nulon Apex+ 5W-30 Long Life Engine Oil 10L + Performance Engine Treatment 500ml
Nulon APEX+, with Advanced Fluid Dynamics, dramatically improves engine oil flow efficiency to reduce power-robbing friction and maximise engine performance when you need it. Responding to driving inputs, Nulon APEX+ flows faster at low temperatures and resists extreme pressure, heat and wear of contacting metal surfaces to promote ultimate performance, fuel efficiency and protection in both everyday stop/start and the most demanding driving conditions.
Nulon APEX+ 5W-30 Long Life engine oil is a General Motors dexos 1 Gen 3 license approved formulation that delivers ultra-high performance and protection for a wide variety of modern petrol vehicles. Featuring the latest additive technology, the formulation promotes efficiency and protects against low speed pre-ignition (LSPI) in direct injection turbocharged petrol engines.
Benefits
- General Motors, Holden and HSV warranty approved where dexos 1 5W-30 is specified
- Oil stays cleaner and in-spec for longer
- Protects against low speed pre-ignition (LSPI)
- Provides excellent engine cleanliness
- Reduces turbocharger deposit build-up
- Compatible with biofuels (E10 and E85)
Nulon Pro-Strength Extreme Performance Engine Treatment is a performance engine oil treatment designed to maximise power in street and modified engines by reducing the friction of contacting metal surfaces. The high tech Moly DTc formula actively creates a low friction sacrificial barrier immediately when metal on metal contact occurs and Moly DTc molecules within the engine oil treatment continuously replenish this high strength barrier as it depletes. The reduction of internal engine friction reduces metal wear and heat, promoting efficiency and maximising engine power.
Benefits
- Dramatically reduces the friction properties of any engine oil
- Reduces internal metal on metal wear
- Slows down the depletion of other anti-wear additives such as zinc
- Provides superior cold start protection
- Suitable for both petrol and diesel engine oils
- Compatible with full synthetic, semi synthetic and mineral engine oils
DIRECTIONS FOR USE:
Warm engine to normal operating temperature and stop engine. Shake bottle and add contents to engine oil. For best results add when replacing with new engine oil. Restart engine to circulate formula, i.e idle for 15 minutes or go for a drive. If car is driven under sustained load or high stress then re-apply halfway between oil changes.
APPLICATION RATES:
Car Engines 1 Bottle
Trucks and 4WD 1 Bottle per 6 litres sump capacity
CAUTION:
Do not reuse container for any other purpose.
