Nulon X-Pro 25W-60 Engine Oil 5L + Performance Engine Treatment 500ml RLK-NLN-291
Type in your postcode or suburb to get an estimate on postage cost.
(Prior to Dispatch)
Nulon X-Pro 25W-60 Engine Oil 5L + Performance Engine Treatment 500ml
Nulon X-PRO performance engine oils feature Advanced Additive Technology (AAT). From the moment you start your engine, Nulon X-PRO delivers outstanding performance and protection against heat and wear in every type of driving condition.
Nulon X-PRO 25W-60 High Zinc Street and Track engine oil is recommended for all large-tolerance and high-performance 4, 6 and 8 cylinder engines where maximum oil pressure and oil film strength are required. Nulon X-PRO 25W-60 High Zinc Street and Track provides ultimate engine performance during competition and the high-stress conditions found in drag, circuit and 4x4 racing.
Benefits
- High zinc formula for extra engine and flat tappet protection
- Viscosity remains stable in high-temperature conditions
- Provides maximum cold-start protection
- Increased oil film strength helps provide protection against metal-to-metal contact
- Helps maintain oil pressure under severe conditions
Nulon Pro-Strength Extreme Performance Engine Treatment is a performance engine oil treatment designed to maximise power in street and modified engines by reducing the friction of contacting metal surfaces. The high tech Moly DTc formula actively creates a low friction sacrificial barrier immediately when metal on metal contact occurs and Moly DTc molecules within the engine oil treatment continuously replenish this high strength barrier as it depletes. The reduction of internal engine friction reduces metal wear and heat, promoting efficiency and maximising engine power.
Benefits
- Dramatically reduces the friction properties of any engine oil
- Reduces internal metal on metal wear
- Slows down the depletion of other anti-wear additives such as zinc
- Provides superior cold start protection
- Suitable for both petrol and diesel engine oils
- Compatible with full synthetic, semi synthetic and mineral engine oils
DIRECTIONS FOR USE:
Warm engine to normal operating temperature and stop engine. Shake bottle and add contents to engine oil. For best results add when replacing with new engine oil. Restart engine to circulate formula, i.e idle for 15 minutes or go for a drive. If car is driven under sustained load or high stress then re-apply halfway between oil changes.
APPLICATION RATES:
Car Engines 1 Bottle
Trucks and 4WD 1 Bottle per 6 litres sump capacity
CAUTION:
Do not reuse container for any other purpose.
