Nulon X-Protect 10W-30 Mineral Engine Oil 5L + Engine Treatment 500ml RLK-NLN-259
Type in your postcode or suburb to get an estimate on postage cost.
(Prior to Dispatch)
Nulon X-Protect 10W-30 Mineral Engine Oil 5L + Engine Treatment 500ml
Nulon X-PROTECT provides excellent everyday protection for a wide range of passenger, 4x4, light commercial, petrol and diesel vehicles. Nulon X-PROTECT uses premium mineral base oils and additives to protect against sludge formation and corrosion, promoting engine cleanliness and smooth engine performance.
Nulon X-PROTECT 10W-30 Fast Flowing Protection engine oil provides excellent anti-wear protection for everyday driving. Formulated for multi-valve and turbocharged 4, 6 and 8 cylinder modern petrol and LPG engines, this oil will keep your engine cool, clean and protected.
Benefits
- Blended for modern Australian, Japanese, US and European vehicles
- Provides excellent fuel economy and engine protection for daily driving
- Excellent thermal stability provides protection from start-up to high operating temperatures
- Premium detergent and dispersant technology keeps engines clean and protected from sludge
- High shear stable polymers provide optimum viscosity control
Nulon Pro-Strength Extreme Performance Engine Treatment is a performance engine oil treatment designed to maximise power in street and modified engines by reducing the friction of contacting metal surfaces. The high tech Moly DTc formula actively creates a low friction sacrificial barrier immediately when metal on metal contact occurs and Moly DTc molecules within the engine oil treatment continuously replenish this high strength barrier as it depletes. The reduction of internal engine friction reduces metal wear and heat, promoting efficiency and maximising engine power.
Benefits
- Dramatically reduces the friction properties of any engine oil
- Reduces internal metal on metal wear
- Slows down the depletion of other anti-wear additives such as zinc
- Provides superior cold start protection
- Suitable for both petrol and diesel engine oils
- Compatible with full synthetic, semi synthetic and mineral engine oils
DIRECTIONS FOR USE:
Warm engine to normal operating temperature and stop engine. Shake bottle and add contents to engine oil. For best results add when replacing with new engine oil. Restart engine to circulate formula, i.e idle for 15 minutes or go for a drive. If car is driven under sustained load or high stress then re-apply halfway between oil changes.
APPLICATION RATES:
Car Engines 1 Bottle
Trucks and 4WD 1 Bottle per 6 litres sump capacity
CAUTION:
Do not reuse container for any other purpose.
