Ruko Machine Tap HSSE-Co 5 UNC with Reinforced Shank Type B 3/8in 265038UNC

Ruko Machine Tap HSSE-Co 5 UNC with Reinforced Shank Type B 3/8in

The machine tap consists of cobalt alloyed heavy-duty high-speed steel. Its high heat resistance means a longer tool life. For through threads and bottoming threads in unalloyed and alloyed steels up to a strength of 1000 N/mm, malleable cast iron and non-ferrous metals. The thread is cut in one operation. Like high speed steel with cobalt alloy. This heat-resistant material is used for processing materials with high strength and in long cutting channels with correspondingly strong heating. The cobalt content of 5% provides a higher heat resistance and higher stressing capacity.

Machine taps with reinforced shank for through threads

Length: 100.0 mm

Stainless steel

Brass

Steel < 800 N/mm

Steel < 1000 N/mm

Shaft: Square shank

Material: HSSE-Co 5

Coating: uncoated

Cutting Direction: right hand cutting

DIN: 2182

Core Hole Diameter: 8.0mm

Spiral Length: 22.0 mm