Meziere Electric Water Pump Ford Sb Late / Belt Drive 35 Gpm Polis WP173U
(Prior to Dispatch)
Type in your postcode or suburb to get an estimate on postage cost.
American made with qualityfar superior to any otherperformance aftermarketcompany, we build our waterpumps with pride right herein the USA. Don't be misleadby inflated flow numbers andcompetitors' outlandishclaims. We say what we meanand mean what we say.
This water pump modelfeatures:
- Fits small block Ford latemodel (1994 and later) withshort water pump front cover
- Suitable for streetor drag strip use - 2500 hourlife expectancy
- Showquality blue anodised finish
- Standard motorprovides 35 gallons perminute free flow rating
- All stainless steelhardware included
- Light weight. Completestandard small block Fordunit weighs only 5.6 pounds!
- Stainless steellarge diameter main shaftwith high performance ceramicseal
- Pump will clearcam belt drives and mostblower drives
- 1" NPTinlet adapters are availablefor #12AN, #16AN, #20AN,1-1/4", 1-1/2" or 1-3/4" sliphose
TechnicalSpecifications:
- Belt Drives: Standard SBFdesign will clear Jesel beltdrives and comparable beltdrive systems. NOTE: If youare running a cam belt driveon your small block Ford, youwill most likely need theWP173 pump. This pump willfit Yates, Danny B, Jesel,and Race Master belt drives.
- Distributor BeltDrives: Spacers will benecessary to clear belt drivedistributor systems.
- Finishing The System: Thispump is supplied completewith gaskets and hardware butwithout the inlet fitting andoptional back plate. Thefitting needs to be orderedaccording to the size of thelower radiator hose. A backplate will be required in allapplications using a stockstyle timing cover.
- Amperage draw: Under normaluse the pump will draw 6-7amps.
- Overall HeightDimension: The standard pumpis 6.10" long from themounting surface to the tipof the pump.
- PumpWeight: This applicationweighs 5.6 lbs.
- 16volt systems: When purchasinga pump for a 16 volt systemwe recommend the 16 voltoptional motor on our pump.The 12 volt pump will workfor limited use applications.
AdditionalNotes:
The standard 35GPM pump is suitable fornormally aspirated engines upto 650HP. Supercharged,turbocharged and highcompression, high horsepowerapplications should use the55GPM High Flow pump only.This model does not acceptheater or bypass hoses as astandard. These may be addedat the factory for anadditional cost. Please callfor details.
The smallblock Ford engine has gonethrough several designchanges at the factory sinceits inception. There are twodifferent 35 GPM pump modelsthat may be right for yourengine. .
Accessoriesfor Small Ford:
WaterPump Spacers:
Thickness.9" WPS173
Relay WiringKit upgrade WIK346