Meziere Electric Water Pump Ford Sb Late / Belt Drive 40 Gpm Polis WP173UHD

Meziere Electric Water Pump Ford Sb Late / Belt Drive 40 Gpm Polis

American made with qualityfar superior to any otherperformance aftermarketcompany, we build our waterpumps with pride right herein the USA. Don't be misleadby inflated flow numbers andcompetitors' outlandishclaims. We say what we meanand mean what we say.

This water pump modelfeatures:

• Fits small block Ford latemodel (1994 and later) withshort water pump front cover
• Suitable for streetor drag strip use - 3000 hourlife expectancy
• Showquality polished finish
• Heavy duty motor provides42 gallons per minute freeflow rating
• Allstainless steel hardwareincluded
• Lightweight. Complete heavy dutysmall block Ford unit weighsonly 5.7 pounds!
• Stainless steel largediameter main shaft with highperformance ceramic seal
• Pump will clear cam beltdrives and most blower drives
• 1" NPT inletadapters are available for#12AN, #16AN, #20AN, 1-1/4",1-1/2" or 1-3/4" slip hose

Technical Specifications:

• BeltDrives: Standard SBF designwill clear Jesel belt drivesand comparable belt drivesystems. NOTE: If you arerunning a cam belt drive onyour small block Ford, youwill most likely need theWP173 pump. This pump willfit Yates, Danny B, Jesel,and Race Master belt drives.
• Distributor BeltDrives: Spacers will benecessary to clear belt drivedistributor systems.
• Finishing The System: Thispump is supplied completewith gaskets and hardware butwithout the inlet fitting andoptional back plate. Thefitting needs to be orderedaccording to the size of thelower radiator hose. A backplate will be required in allapplications using a stockstyle timing cover.
• Amperage draw: Under normaluse the pump will draw 6-7amps.
• Overall HeightDimension: The heavy dutypump is 6.60" long from themounting surface to the tipof the pump.
• PumpWeight: This applicationweighs 5.7 lbs.
• 16volt systems: When purchasinga pump for a 16 volt systemwe recommend the 16 voltoptional motor on our pump.The 12 volt pump will workfor limited use applications.
• Additional Notes:
• The standard 42 GPMpump is suitable for normallyaspirated engines up to650HP. Supercharged,turbocharged and highcompression, high horsepowerapplications should use the55GPM High Flow pump only.This model does not acceptheater or bypass hoses as astandard. The small blockFord engine has gone throughseveral design changes at thefactory since its inception.There are two different 35GPM pump models that may beright for your engine.

Accessories for SmallFord:
Water PumpSpacers:
Thickness .9"WPS173
Relay Wiring Kitupgrade WIK346