Nulon 75W-85 Manual Gearbox Transaxle Oil 1L + Gearbox Diff Treatment 125ml RLK-NLN-270
Type in your postcode or suburb to get an estimate on postage cost.
(Prior to Dispatch)
Nulon 75W-85 Manual Gearbox Transaxle Oil 1L + Gearbox Diff Treatment 125ml
Is an extreme pressure API GL-4 fully synthetic gear oil, with superior high temperature stability when compared to conventional mineral gear oils. Ideal for use in transaxle applications with combined manual gearbox and differentials.
Nulon Full Synthetic 75W-85 Smooth Shift Manual Gearbox and Transaxle Oil (SYN75W85) is an extreme pressure API GL-4 fully synthetic gear oil, with superior high temperature stability when compared to conventional mineral gear oils. Ideal for use in transaxle applications with combined manual gearbox and differential.
Nulon SYN75W85 is formulated using hydrofinished base fluids with superior additive packages to enhance wear protection, corrosion protection, seal compatibility and low temperature characteristics. The optimized formulation has maximum oxidation and thermal stability to ensure fluid durability and performance during its life time.
The hydrofinished base oils used in SYN75W85 are Very High Viscosity Index (VHVI) base fluids that have advantages of low volatility for better oil consumption, low wax content for improved low temperature fluidity, high saturates level for excellent thermal and oxidation stability, and low sulphur and aromatic compounds for improved environmental outcomes.
Nulon SYN75W85 is designed mainly for manual transmission and transaxle application where API GL-4 is recommended. It is intended for use in axles with spiral bevel gears under moderate to severe speed and load conditions. It can also be used for axles with hypoid gears under moderate speeds and load conditions. Nulon SYN75W85 may be used in selected manual transmission and transaxle applications where API MT-1 lubricants are not suitable.
Benefits
- Reduces gearshift baulking in cold temperatures
- Excellent wear reduction and good friction behaviour
- High thermal and oxidation stability for longer oil life
- Superior oil film strength for excellent protection
- Improved low temperature performance
- High viscosity index for better performance at high operating temperature
- Good corrosion protection and rust prevention for longer component life
Nulon Smooth Shift Manual Gearbox and Diff Treatment G70 with PTFE offers maximum lubrication and anti-wear protection to the gear and bearing surfaces of all types of gears (helical, spur and worm drive). Nulon G70 combines a balanced blend of Polytetrafluoroethylene (PTFE) with other extreme pressure and anti-corrosion compounds. Nulon G70 is suitable for use with all synchromesh rings and limited slip differentials.
The PTFE particles in Nulon G70 range from .4 to 40 microns. The smaller particles, when subjected to pressure and temperature, impregnate the friction surfaces thus reducing friction and offering residual lubrication and corrosion resistance even during lay-up periods. The larger PTFE particles circulate with the normal gear lubricant and create a cushion between gear surfaces, dramatically reducing gear pitting. This cushioning effect is important in that it reduces noise caused by minor irregularities of mating surfaces which are responsible for the very common "period noise" experienced in differentials.
Many modern gearboxes suffer from poor gear shifting when the gearbox is cold. As a result a number of manufacturers are recommending a lighter grade of oil, and in some cases automatic transmission fluid. These lighter grade oils provide superior gear changing at the expense of reduced life of gears and bearings, because the lower viscosity oil does not have the degree of EP (extreme pressure) protection. Nulon G70, due to its EP characteristics, will greatly improve protection as well as dramatically improve gear changes.
Note: G70 is suitable for all gearboxes including passenger cars, trucks and industrial gearboxes.
G70 is also compatible with, and suitable for use with, automatic transmission fluid and engine oils, where they are the manufacturer's recommended lubricant for manual gearboxes.
Benefits
- Reduced friction and wear
- Smoother gear changes
- Quieter operation
- Extended component life
- Reduced oil leaks
- Improved extreme pressure protection
- Residual lubrication during lay-up periods
- Corrosion protection
- Reduced operating temperature
- Reduced energy consumption in industrial gearboxes
