Nulon Semi 75W-90 Gearbox Transaxle Oil 20L + Gearbox Diff Treatment 250ml RLK-NLN-269
Type in your postcode or suburb to get an estimate on postage cost.
(Prior to Dispatch)
Nulon Semi 75W-90 Gearbox Transaxle Oil 20L + Gearbox Diff Treatment 250ml
Nulon Semi Synthetic 75W-90 Smooth Shift Manual Gearbox and Transaxle Oil (SS75W90) is an extreme pressure API GL-5 semi-synthetic hypoid gear oil that provides superior wear protection. Ideal for use in transaxles with combined manual gearbox and hypoid differential. For use in passenger cars and light commercial vehicles. Suitable for towing and 4x4 operation.
Nulon SS75W90 is optimized using the synergy of synthetic and high quality mineral base fluids for use in manual gearbox and transaxle oil. SS75W90 is engineered with superior additive technology to enhance wear protection, oxidation stability, corrosion protection, and low temperature characteristics.
SS75W90 is suitable for use where high operating temperature, high speed or low speed and high load conditions exist . It provides anti-scoring properties for components that experience heavy duty conditions. It is fortified with anti-oxidant inhibitor to prolong the oil life and prevent sludge build up and varnish formation.
Nulon SS75W90 can be used as a substitute for SAE 80W-90 or SAE 90 viscosity oil for gearboxes that are experiencing gear shift problems or are notchy when cold.
Benefits
- Reduces gearshift baulking in cold temperatures
- Excellent wear protection
- High temperature stability
- Superior oil film strength
- Good corrosion protection and rust prevention for longer component life
- Longer service life
- Excellent seal compatibility to prevent leakage
- Excellent antioxidant to prevent sludge build up and varnish formation
Nulon Smooth Shift Manual Gearbox and Diff Treatment (G70) with PTFE offers maximum lubrication and anti-wear protection to the gear and bearing surfaces of all types of gears (helical, spur and worm drive). Nulon G70 combines a balanced blend of Polytetrafluoroethylene (PTFE) with other extreme pressure and anti-corrosion compounds. Nulon G70 is suitable for use with all synchromesh rings and limited slip differentials.
The PTFE particles in Nulon G70 range from .4 to 40 microns. The smaller particles, when subjected to pressure and temperature, impregnate the friction surfaces thus reducing friction and offering residual lubrication and corrosion resistance even during lay-up periods. The larger PTFE particles circulate with the normal gear lubricant and create a cushion between gear surfaces, dramatically reducing gear pitting. This cushioning effect is important in that it reduces noise caused by minor irregularities of mating surfaces which are responsible for the very common "period noise" experienced in differentials.
Many modern gearboxes suffer from poor gear shifting when the gearbox is cold. As a result a number of manufacturers are recommending a lighter grade of oil, and in some cases automatic transmission fluid. These lighter grade oils provide superior gear changing at the expense of reduced life of gears and bearings, because the lower viscosity oil does not have the degree of EP (extreme pressure) protection. Nulon G70, due to its EP characteristics, will greatly improve protection as well as dramatically improve gear changes.
Note: G70 is suitable for all gearboxes including passenger cars, trucks and industrial gearboxes.
G70 is also compatible with, and suitable for use with, automatic transmission fluid and engine oils, where they are the manufacturer's recommended lubricant for manual gearboxes.
Benefits
- Reduced friction and wear
- Smoother gear changes
- Quieter operation
- Extended component life
- Reduced oil leaks
- Improved extreme pressure protection
- Residual lubrication during lay-up periods
- Corrosion protection
- Reduced operating temperature
- Reduced energy consumption in industrial gearboxes
