Wera Safe-Torque A 2 Torque Wrench with 1/4in Hexagon Drive 2-12Nm 075801
(Prior to Dispatch)
Type in your postcode or suburb to get an estimate on postage cost.
Wera Safe-Torque A 2 Torque Wrench with 1/4in Hexagon Drive 2-12Nm
OverviewTorque wrench with slide-over mechanism. Once the set torque has been reached, the tool cannot be overtightened, so that excessive torque cannot be applied. Setting range of 2 to 12 Nm for controlled clockwise and counterclockwise torque operation. Easy setting and saving of the default value: The audible and tactile clicks on reaching the scale values facilitate the safe setting of the desired torque value. With Torque Lock function for use as a standard ratchet without torque function. Thus also usable for applications with angles of rotation. The return angle of only 5 allows the ratchet to be used even in confined spaces.
FeaturesSlip-over release mechanism - the set torque can never be overtightened
Torque Lock function: The torque function can be deactivated and the tool can then be used as a standard ratchet with high loosening moments and for applications with defined angles of rotation
For controlled clockwise and counterclockwise torque operation - tightening and loosening with or without torque
Easy setting and saving of the desired torque value with audible and tactile clicks when reaching the scale values
After the target torque has been reached, the release angle is only 30
The fine toothing with 72 teeth allows for a low return angle of 5
1/4" hexagon drive for the use of 1/4" bits
Mounting Size Hexagon: 1/4"
Main Scale Graduation: 0.1Nm
Main Scale Measuring Range: 2-12Nm
Subscale Measuring Range: 2-9 lbf. ft
Torque Wrench Length: 244mm
Handle Length: 94mm
Clock Diameter: 38.5mm
Head Diameter: 31.6mm